Quote:
Originally Posted by maverick9611
just back from rolex 24.
i put stick coils on and used starting fluid to fire it up. both cylinders are firing and in operation. pilot jets need adjustments. will work on that during the week.
let it idle for 5 min to make sure all ether was gone.
so why is cyn#2 running now?
i did see a post about coils and being properly grounded. any thoughts?
|
Yes, secondary-coils are grounded through mounting-bolt. If they don't have good ground there, won't have good spark. Since you swapped in coils from green bike, issue is most likely with mounting-surface on motor-mount. Although bolt-threads should make plenty of contact.
I thought you tested for spark and you had spark on both? And after swapping coils from green bike?