Quote:
Originally Posted by kkim
this is entirely a guess... but, did you check your float level to see what is was set at when you installed the jet kit?
|
I did not check that, I heard they were set right from the factory so I didn't pay any attention to them when I had the carbs torn apart. Today after coasting down a hill it died again, and this time I was only at 1/3 throttle before pulling in the clutch and coasting. I'll have to check the float levels... I'm pretty sure its not my mixture screws since when I blip the throttle it very quickly returns to Idle. Thanks again for your help Kelly.