Update: I went ahead and drained the carb bowl that is easy to get to. The 2nd one (the one closest to the fuel input) was a little out of reach for my hex tool without a lot of trouble. I saw absolutely ZERO water in the fuel I drained. There was a very small amount of trash, but no water. I'm gonna run it tomorrow and see how it does. Will report back.
Heres the gas I drained out of the 1 carb, I cleaned the can and dried it prior to draining. The stuff on the left side that looks a little like water is actually a reflection from my flash and the side of the can that had fuel on it still.
