[JooKan]

Hi, I am very much new to motorcycles and got the tires changed recently. I have some experience with mechanic work and the documentation is good so i opted to take off and install the wheels myself and only pay for the tire change.
The installation of the wheels was quite straightforward but i ran into issues with alignment, mainly the fact that the wheel is not straight if the chain is and the chain is not straight if the wheel is aligned with the front wheel.
I used a laser to align the chain and the string method to align by the front wheel. With the chain straight the alignment markers in the swingarm are quite far apart with the left side nearly one notch behind the right side. When aligned with the string the markers are within reasonable inaccuracy from each other.
So my question is wether this is a major issue. The chain is maybe 3-4mm off line at the countershaft.
Thank you for the help.
-Joonas