Quote:
Originally Posted by maverick9611
if you have 40's in you cannot be lean on the bottom end. start out with shimming needles with 2 washers. you will be amazed at the change. buy a good pilot adjusting tool to help you set the pilots. I use a motion pro. works everytime
here is some info by ghostt on bench syncing and adjusting pilots (with 40's start with 2 turns out)
https://www.ninjette.org/forums/showthread.php?t=223984
look for Conan pic on pilots. go ahead take that snork out, its a 10 min. job!
|
I have 40 pilot jets but haven't installed them yet.. planning on doing all of them at the same time once el cheapo arrive
will ask my mechanic friend if he has that tool!
thank you!