So curiosity got the best of me and i sprung for the Factory Pro stage 3 kit for the needles.
Did not ask anyone but was hoping it would come with 108 main jets.... it did not. 110-115's and a 40 pilot.
So my current set up with stock needles 5 washers, 40 pilot, 110 mains the bike runs good 1/4th throttle to redline, rich at 1/8th-1/4th throttle.
I was gonna go back to the 38 stock but instead put in the factory pro needles today and kept jets the same. I guessed on the clip settings based on my stock needle shims and comparing the two different needles.
Figured i would just share some pictures of the two needles side by side.
So FP needle on the top and the stock needle on the bottom. In the full needle shot it is easy to see how long the FP needle is compared to the stock needle. Even with the factory having the clips in the #4 position.
|