Quote:
Originally Posted by n4mwd
It wouldn't hurt to check the sync. As long as you didn't touch the valves its probably OK. The sync is an air adjustment and the washers affect fuel. Not only that, but if you put the same number of washers on both sides then they are equal anyway. I'm not 100% sure about the slip on, but that is on the exhaust side of the valves so it shouldn't make a difference with carb sync. But checking it only takes a minute in case the adjuster screw got bumped or is otherwise out of adjustment.
I'm not sure what you guys are doing with the screws. I've removed and replaced them numerous times and never had a single one strip. I'm using standard phillips screwdrivers, usually #2, and never had an issue on either bike.
|
the rest of the world has problems with em, maybe you have the best carb in the world.