Quote:
Originally Posted by marshallsmith27
I did take them fully apart and clean them with kerosene, gasoline and carb cleaner. Those deposits I cant seem to get rid of no matter what I use. the scuffs you see on the left float bowl is from a dremmel with a wire wheel. I dont know why those deposits do not want to come off. But yes the emulsion tubes are spotless inside and out. I made absolute sure this time so I dont have to keep double checking the small things over and over again!
|
Yes, those deposits are also inside carb passages and jets. That's where ultrasonic soaking and micro soda-blasting comes in. Stuff you can reach, you'll want to scrub out with PEA-based fuel-system cleaner. More active than solvents alone.
https://www.amazon.com/dp/B07QR98PRW/ - brushes
- Red Line SI-1
- Techron Concentrate Plus
- Gumout All-in-One
- 3M Max Strength Fuel System Cleaner #08814
- Royal Purple Max Atomizer 18000
When your process returns clean bowls like this, you can be assured all internal passages and jets are equally clear: