Quote:
Originally Posted by edxmon
All that is necessary is to enlarge the pin holes(+2-3mm Dia) and shave a bit off the side of the mounting surfaces (-2-3mm thickness). I did it with files which took me a while, but not more than 30 min on each peg, then again I don't shy away from hard work :P
For the $14 I spent on the pegs, not bad at all.
|
That isn't bad at all. I had to do that and more when I put a set on my SV.
Thanks, I'll be ordering them shortly.
BTW: I'm 6'00" and 230.