View Single Post
Old October 1st, 2019, 08:21 PM   #2
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
For 2008-12 new-gen, look at big bundle of wiring under rear of tank on each side. May need to unwrap some electrical tape to see wire colours and perhaps find taped-up remnants of turn-signal wires. On left side is green & black/yellow wires



On right is grey & black/yellow wires



If yours has been cut off, you’ll want to use original HB050 connectors:
https://www.corsa-technic.com/catego...ategory_id=163


If you have to add wire to restore proper length & reach, use western-union (lineman) splice so you only have to do it once and never have to worry about it again. All electrical connections are tied/crimped and soldered and heat-shrink wrapped in pro-motorsports, aerospace and military applications for performance, reliability and durability.

Link to original page on YouTube.e to


Last futzed with by DannoXYZ; October 2nd, 2019 at 02:25 AM.
DannoXYZ is offline   Reply With Quote