ninjette.org - View Single Post - Bought Used 2012 Ninja 250r. Bike turns off after I press the throttle after a stop

DannoXYZ · March 22nd, 2019, 10:52 AM

If that's vent-tube is connected to middle of carb-assembly, it should be routed down between carb-intake tubes and come out by bottom of shock. Ends up at drain for crankcase and vent for gas-tank. Outlet of vent-tube should be lower than carbs.

March 22nd, 2019, 10:52 AM	#17
DannoXYZ ninjette.org certified postwhore Name: AKA JacRyann Location: Mesa, AZ Join Date: Dec 2011 Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C Posts: A lot. MOTY - 2018, MOTM - Nov '17	If that's vent-tube is connected to middle of carb-assembly, it should be routed down between carb-intake tubes and come out by bottom of shock. Ends up at drain for crankcase and vent for gas-tank. Outlet of vent-tube should be lower than carbs.