View Single Post
Old November 15th, 2017, 03:31 PM   #22
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
I think you are having difficulty matching up vacuum hoses you see on bike with pictures and diagrams. Best to remove carbs from your bike and take a picture of it like this, then match up hoses and where they go.



Quote:
Originally Posted by Darksik View Post
I found where is the vacuum from the petcock but now the problem that i see is the "coasting enricher vacuum hose" is connected to the "vacuum of the petcock" and where should be connected the petcock is not connected to anyplace
Note that there are TWO vacuum sources, one per carb. According to GOOD picture:

1. Where does hose for “coasting enricher vacuum hose” plug into?
2. Where does hose for “vacuum hose to petcock”plug into?

Also note that NOTHING should be plugged into “carb sync adjuster screw” like you had earlier.
DannoXYZ is offline   Reply With Quote