ninjette.org - View Single Post - Planning a streetfighter build; making a list of parts

Cra1g · August 24th, 2016, 05:20 PM

Alright so I started ripping apart my bike today (pics below). The red rag is simply covering up the exposed top end since I also need to check the valves and replace the gasket. Also going to install an aftermarket fuel filter, probably replace the clutch lever since it's bent, clean the air filter, and a couple of other smaller things.

August 24th, 2016, 05:20 PM	#15
Cra1g ninjette.org member Name: Craig Location: San Luis Obispo, CA Join Date: Jul 2016 Motorcycle(s): 2014 Ninja 300 ABS, 2007 Yamaha FZ6 Posts: 210	Alright so I started ripping apart my bike today (pics below). The red rag is simply covering up the exposed top end since I also need to check the valves and replace the gasket. Also going to install an aftermarket fuel filter, probably replace the clutch lever since it's bent, clean the air filter, and a couple of other smaller things.