|
The speedometer cable connects to the back of the gauge cluster, specifically the threaded tube directly behind the speedometer. The other end connects at the wheel hub on the left side. There is another threaded tube there. If the cable is connected at these locations and the speedo still doesn't function, try removing the connection at the wheel and making sure it is oriented properly. The end of the inner cable should have a fork in it. If it does, place it back into the hub and try to rotate the inner cable with your fingers. If it rotates, the fork isn't engaging the internals properly. Wiggle and twist it around until it seats. You will know it is in place when most of the end is seated in the hub, almost up to the actual braided cable.
|