View Single Post
Old June 18th, 2013, 10:28 AM   #16
tsdexter
ninjette.org member
 
Name: Thomas
Location: Ontario
Join Date: Jun 2012

Motorcycle(s): 2008 Ninja 250R - Kawi Green

Posts: 138
Quote:
Originally Posted by cookiebug79 View Post
To remove push the center in. I used an allen key for no good reason other than it was hard:

To re-install, pull the top part out and snap it all back together:
Thanks for the handy guide...turns out I was doing it right all along and the ones on the underside came out no problem, as they should.

The reason I had difficulty/was unsure I was doing it right was because 4 of them were inserted where there should have been screws into wellnuts... So these were sticking into wellnuts and even after popping in were impossible to pull out without breaking them.
tsdexter is offline   Reply With Quote