Quote:
Originally Posted by gitter
Started unwrapping the main harness (still in the bike) starting at the plug for the right handlebar switches. Out of curiosity i measured resistance on the two power wires again (after starting to unwrap the harness) and resistance had dropped down to 1.8 / 1.9. If resistance is dropping the more i unwrap the harness, does that mean I'm headed in the right direction?
|
Quote:
Originally Posted by gitter
Sorry I didn't specify, I was measuring from the red wire to the chassis ground.
|
hmm, if both wires from switch has connection to ground, that sounds like TWO shorts. They go in opposite directions, one goes to on/off switch and battery. The other goes to coils and ECU.
Resistance lowering may mean that the movements you're doing is making the short worse.