Quote:
Originally Posted by KCninja
Ok, tonight i'll try to tap into the blue and black then and see if that changes anything. Also if i need a transistor where would i put in the wiring and exactly what kind of transistor should i get?
|
Your want the blue and the black not red and black. Probably can get your basic pnp transistor, should be rated for 12v but I believe most are at 15v or higher. Three pronged, Base Emitter and Collector, the blue line would connect to the base, the emmiter to a 10k resistor(R2) to ground(black) and the battery power to a 10k resistor(R1) which connectes to the collector and the LED(+). The LED(-) connects to ground as well.
@
CThunder-blue maybe able to elaborate on this or define a better method for making this work