ninjette.org - View Single Post - Rebuilt my carb, now throttle bracket is getting stuck when pulling on throttle

ZackTheReaper · May 17th, 2023, 10:14 PM

I took the carb out, re cleaned it and check everything over. And out I back in and it stopped getting caught. The bike starts and will idle just under 2k the choke open. If I close it, it goes up to 6k. If I give it any throttle ( choke open or closed) it bogs down and dies. I’m not sure if there is a vacuum leak or didn’t screw a jet in enough or something.

May 17th, 2023, 10:14 PM	#6
ZackTheReaper ninjette.org member Name: Zackary Location: 1912 Waverly Ct. Join Date: May 2023 Motorcycle(s): 2009 Ninja 250r Posts: 12	I took the carb out, re cleaned it and check everything over. And out I back in and it stopped getting caught. The bike starts and will idle just under 2k the choke open. If I close it, it goes up to 6k. If I give it any throttle ( choke open or closed) it bogs down and dies. I’m not sure if there is a vacuum leak or didn’t screw a jet in enough or something.