Quote:
Originally Posted by InvisiBill
|
Thanks a lot for sending this. This is what I have too. I have to assume that I have it the right way with the flat side of 92144 on the left and the angled side going to the right. The other thing I noticed is I have to shift the first friction plate to the left one notch just like the outter one is. I really should have taken a pic before disassembly because I'm not sure which groove they go in since they fit in both notches. I will have to google a few pics to make sure. Thanks for your help and getting back so fast! (When I uploaded the pic, it rotated it 90 degress CCW so it probably looks way off)