Ok guys, I need help.
I had a helluva time getting the cable out from the lever but I did and lubed it and everything now I'm having trouble getting it back to normal.
Ok so I got the adjuster screw to screw back into the lever housing as you can see but there is no slack in the clutch cable. When I got it to screw in I could only turn it about two times by hand before I had to use pliers to screw it in a little more. I am afraid to keep screwing the adjuster in because it's getting tighter and I don't want to break something. I can pull the lever but it is pretty stiff and there is no free play at the end of the lever. Can anybody see/tell what is wrong?
Btw while doing this I also swapped the stock levers for some new pazzos