ninjette.org - View Single Post - Throttle went while riding -> need new throttle cable?

PartsNinja · September 5th, 2013, 06:19 AM

Its not hard, remove the tank to make access easier to route the cable. Then undo the bolt that holds the broken cable to the carb. re-reoute new cable, undo the right switch assembly (be very careful to note how the cables are routed inside right when youy take the two halves apart) and insert the new cable to the throttle tube. then put everything back together. you may need to adjust the bolt on the carb to adjust the cable to be the right length. very simple

September 5th, 2013, 06:19 AM	#9
PartsNinja Ninja Parts Master Name: Dan Location: Houma, Louisiana Join Date: Aug 2013 Motorcycle(s): 2011 Ducati Streetfighter 1098, 2014 Honda CB1100 Cafe, 2007 SV1000S, Quite a few 2008-2012 Ninja 250s Posts: 366	Its not hard, remove the tank to make access easier to route the cable. Then undo the bolt that holds the broken cable to the carb. re-reoute new cable, undo the right switch assembly (be very careful to note how the cables are routed inside right when youy take the two halves apart) and insert the new cable to the throttle tube. then put everything back together. you may need to adjust the bolt on the carb to adjust the cable to be the right length. very simple __________________________________________________ Add me on Instagram: @d_jalb Or follow me on eBay: PartsNinja