ninjette.org - View Single Post - Coolant leaking into oil and oil leaking out of somewhere.

FvnnyL3tt3r1ng · May 22nd, 2013, 02:38 PM

Yeah 2DC is top dead center for cylinder 2. This way none of the cam lobes will be pushing against the valves while you're installing (and of course the timing between the piston and the stroke will be correct).

I put a coat hanger in the middle of the chain to keep it from falling down until I put them on the sprockets.

May 22nd, 2013, 02:38 PM	#20
FvnnyL3tt3r1ng ninjette.org certified postwhore Name: Justin Location: Florida Join Date: Aug 2012 Motorcycle(s): Ninja 250 2001 Posts: A lot.	Yeah 2DC is top dead center for cylinder 2. This way none of the cam lobes will be pushing against the valves while you're installing (and of course the timing between the piston and the stroke will be correct). I put a coat hanger in the middle of the chain to keep it from falling down until I put them on the sprockets.