View Single Post
Old November 19th, 2010, 08:53 PM   #49
Robbo81
ninjette.org member
 
Robbo81's Avatar
 
Name: Robert
Location: sydney
Join Date: Sep 2009

Motorcycle(s): 250r

Posts: 35
YEAR: 2009

INTAKE MODIFICATIONS: Snorkel removed

EXHAUST MODIFICATIONS: Stock

JET KIT OR STOCK? Jet Kit

BRAND OF JET KIT? Dyno Jet

MAIN JET: 96

NEEDLE AND CLIP POSITION: 3rd Position from the top

MIXTURE SCREW SETTINGS: Started at 3 turns out. not sure what its at now

ELEVATION: ??? 80 to 200 ft ??? Sydney, Australia

MISCELLANEOUS INFORMATION ABOUT YOUR BIKE’S JETTING SETUP:

Bike is totaly stock apart from these mods. It used to loose power at about 10500rpm to 11000rpm. Thought I would give this a try. I bought a dynojet kit stage 2 off ebay. Now the bike pulls all the way to red line. Its not a massive increase in power, just a lot more rider friendly and can be pushed harder if you want too. Running a little rich down low though and fuel economy has gone out the window, but that could be due to constantly going to red line as I could not do this before . Wouldn't mind trying the 98 jets just to see if it makes a difference.
Robbo81 is offline   Reply With Quote