YEAR: 2010
INTAKE MODIFICATIONS: K&N R0990, Kleen Air System Removed
EXHAUST MODIFICATIONS: Yoshimura Full System
JET KIT OR STOCK? Jet Kit
BRAND OF JET KIT? Factory Pro
MAIN JET: 110 FP
PILOT JET: 40 FP
NEEDLES AND CLIP POSITION: Factory Pro / 4th position (from top)
MIXTURE SCREW SETTINGS: 2 1/4 turns out
FLOAT HEIGHT: 16.9 mm
ELEVATION: Sea Level (Texas Gulf Coast)
MISCELLANEOUS INFORMATION ABOUT YOUR BIKE’S JETTING SETUP: Was running 112 mains, tried the 110's and improved overall response without any top end loss. 40 pilots are an improvement over the 38's on the on the low end also. Initially clips in 3rd position, some surging at 5 to 6k rpm, changed to 4th position. Also required mixture screws to be readjusted to 2 1/4 out.
__________________________________________________
K&N 0990, FP Jet Kit, Yoshimura Full System, Kleen Air Removed, Kisan Modulators Front and Rear
Last futzed with by Shiloh; February 15th, 2011 at 08:52 AM.
Reason: Add Float Height
|