ninjette.org - View Single Post - Jetting Database

Tigerpaw · May 7th, 2009, 08:05 PM

I always start at 2 or 2.5 turns out from tight,on both(with factory pro needles) and have probably gone from 1 to 5 in small even increments.

When you add shims above the e-clip, do you top it off with another e-clip to hold them down?

I have tried new spark plugs, both sets looked dark/oily, but I have been doing so much starting/dying with choke....

I have tried restricting the K&N with masking tape....and tried without any filter

?????????

???????????????????

May 7th, 2009, 08:05 PM	#15
Tigerpaw ninjette.org guru Name: Tom Location: Dayton, OH Join Date: Jan 2009 Motorcycle(s): '13 Ninja 300 '09 Boulevard C50. '08 250r(TOTALED BY DEER) Posts: 467	I always start at 2 or 2.5 turns out from tight,on both(with factory pro needles) and have probably gone from 1 to 5 in small even increments. When you add shims above the e-clip, do you top it off with another e-clip to hold them down? I have tried new spark plugs, both sets looked dark/oily, but I have been doing so much starting/dying with choke.... I have tried restricting the K&N with masking tape....and tried without any filter ???????????????????????????? __________________________________________________ CHEERS!!!