After receiving the carbs and installing them I went for roughly a five mile ride to warm it up (none of the rear section installed, so it was all in the neighborhood as no tail lights or license plate) We tried to get the idle adjusted properly. This is when the strange idle thing occured.
So it was all taken apart for a valve check. Upon reassembly the problem was discovered.
The left manifold is what is leaking. Apparently the float stuck and filled the cylinder with gas as well as the crank will not rotate.
So it's got to come apart again.
In the middle of trying to move, and bidding on an ebay auction. Wil try to get more into it later.