ninjette.org - View Single Post

NevadaWolf · February 4th, 2014, 03:08 PM

@rasta are you talking about the small rivets that attach the radiator cowl to the lower fairings? Look like this...

All you need to do is use the small hex key you used on the little bolts to push in on the center of the rivet. It pops in once and the whole thing comes out easily. To reinsert, you just pushthe center part back out (to resemble the above pic), put it back in the holes of the cowling, and push the center into its locked position flush with the rest.

February 4th, 2014, 03:08 PM	#19
NevadaWolf Certified looney toon Name: Teri Location: 39°52'40.7"N 118°23'53.8"W (Northern NV) Join Date: Jun 2012 Motorcycle(s): 2012 Ninja 250, 102k+ miles -- 2014 CB500X, 42k+ miles Posts: A lot. Blog Entries: 16 MOTM Jul '13, Jul '14	@rasta are you talking about the small rivets that attach the radiator cowl to the lower fairings? Look like this... All you need to do is use the small hex key you used on the little bolts to push in on the center of the rivet. It pops in once and the whole thing comes out easily. To reinsert, you just pushthe center part back out (to resemble the above pic), put it back in the holes of the cowling, and push the center into its locked position flush with the rest. __________________________________________________ <-- Linky Hey Unregistered! The code [you] shows the username currently logged in. IBA # 56020 AMA # 521481 Fun Rides! ][ My Videos ][ My Gear Hold yourself to the same rules you expect others to follow.