My 2¢,
As far as being more visible, I upgraded my lights. For headlight I went with an HID set-up, it's a DDM TUNING 55w/6k, extremely bright, and have had no issues with blinding oncoming traffic, once I reaimed the headlight. Tail/brake I used an 80w CREE LED, and installed a brake light modulator, and also installed 2 CREE LEDs in the bottom of the license plate, which are tied into the brake. Rear turn signals 80w CREE LEDs.Front turn signals I did a set of switch back CREE LEDs modification, and replaced the amber reflectors with a amber flush mount, which adds to more side visibility when turning.
I also replaced the OEM graphics with a custom made reflective silver, and rim tape.
I believe that you can see all these mods in my blog, if not PM me.
I did add white smd strips under the tank, which adds some nice accent lighting, but not too much.
__________________________________________________
violente et ignorantia
ZX-2R BLOG
Twitter and Instagram = Ghostt_Scott
I'm not here to change your mind, just to inform.
|