Quote:
Originally Posted by JacRyann
yes, when I got my bike, I removed the carbs and removed every clamp and hose for cleaning. Then re-assembled using that picture as guide. Every hose has only two ends. Each end has only ONE correct location to install. I connect one end of hose, then the other end. Then next hose, one end at a time.
ah, there’s the problem. There is NO “T” connection going to petcock. You have wrong picture or getting confused somehow.
Take snapshot of owner’s manual and post it here.
|
And this is the air vacuum system
In this picture show how is connected the air vacuum system look the
NUMBER 6 is the same connected to the "T"
vacuum1
vacuum2