Thread
:
Starting issue. PLZ Help
View Single Post
August 27th, 2021, 02:57 PM
#
11
vani11a
ninjette.org member
Name: Zachary
Location: San Antonio
Join Date: Aug 2021
Motorcycle(s): 2017 Ninja 300
Posts: 11
So I cut the grey wire(anti-theft) before and after connector leading to ignition and ECU. I put 2x 100 Ohm resistors in line with the grey wire, then plugged the connection in like normal. Then the brown and grey wire on one pole of the toggle switch and the green 12v on the other. Then just connect all the rest(only when starting) with the other orange 12v wire.
vani11a
View Public Profile
Send a private message to vani11a
Find More Posts by vani11a