View Single Post
Old October 17th, 2011, 09:07 PM   #121
wayanlam
ninjette.org certified postwhore
 
wayanlam's Avatar
 
Name: Wayan
Location: Bali - Indonesia
Join Date: Apr 2009

Motorcycle(s): 2014 Z250

Posts: A lot.
the mechanic promised to have it done by Thursday this week. about to pass by later today to see how its coming along.

while the bike is there, we are gonna change out oil in the front forks, its due a change. and replace the brake oil with some DOT4. gonna try and balance out the front and rear suspension once its all reassembled. hope the lack of weight from having no farings wont affect the front suspension in a negative way. might buy a pre-load adjuster if i find that the front shocks are too soft~hard

the back shocks are totally adjustable now that i have GSXR shock in there:


but again, i hope the bike weighs enough to give the suspension enough static sag. without the engine block, it was way too stiff when i hopped on the bike to make sure it was all bolted tight, after reassembling it.
__________________________________________________
Kawasaki Z250, Bored up to 300cc with 12.8 CR, 41hp at wheel 27nm torque, Two bros full exhaust with DB killer
Dynojet Power Commander V, KnN Open filter, intake and exhaust ported, Puig Windshield
wayanlam is offline   Reply With Quote