View Single Post
Old June 25th, 2019, 04:41 PM   #32
59096
ninjette.org member
 
59096's Avatar
 
Name: Garry
Location: Bungendore Australia
Join Date: Jan 2019

Motorcycle(s): GPX250 1989 model and 1990 model

Posts: 98
Just a thought but have you checked the condition and adjustment of the air screws underneath the carb that are so hard to adjust when the carbs are installed. They have a very fine end that can break off and if the “O” ring is damaged or the small flat washer that holds the “O” ring in place under the spring is missing they can leak and cause problems. I mention them because I didn’t see them in your pictures so wonder if you have taken them out to check?
__________________________________________________
Perpetua Culpa Alterna Vagus
59096 is offline   Reply With Quote