Quote:
Originally Posted by choneofakind
So you're not planning on wiring in the solenoid at all? It's just going to leave the cut-off gate flipped up the whole time? Then you don't have distance vision at night.
low beam. Cut-off gate up:
high beam. Solenoid powered and cut-off gate dropped:
You want high beams so you don't outrun your headlight. |
Changed my mind on the wiring, thanks to you. So here's what I did. I retained all the original wiring and didn't need to use what came with the kit. The 4 halos are wired to the original daylight running lights, which come on when you turn the key. Both healights are wired to original low beam right headlight wire harness, then routed to my blue glow switch. The original high beam switch now controls both solenoids for the projectors. I will take some pictures of the setup before I put it all back to together they should be up today.