View Single Post
Old July 2nd, 2022, 10:04 PM   #2
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Yes, I've used Motion Pro clutch cable and have spare one in my toolbox. Works just fine! I've been trying to find one with teflon-lined housing, but no luck yet. Might have to fit an MTB brake-cable perhaps.

Thing to be careful about is slot in adjuster in lever. It has sharp edges and will shred your cable! I always make sure to have adjuster turned so that slot is aimed up and down since cable is moved laterally by motion of lever.

Last futzed with by DannoXYZ; July 3rd, 2022 at 09:20 PM.
DannoXYZ is offline   Reply With Quote