View Single Post
Old January 7th, 2019, 02:40 PM   #41
tgold
ninjette.org sage
 
Name: Timm
Location: West Seneca, NY
Join Date: Oct 2015

Motorcycle(s): 2006 1050 Speed Triple, 2010 250 Ninja racebike, YZF320RR? Racebike

Posts: 556
MOTM - Nov '15
Quote:
Originally Posted by SpotTheDogg View Post
A few iterations of the ZZR250GP since I last checked in, Paul build a Honda NSF250R Moto3 inspired under tail exhaust.







We had the ZX-6R front end on it for a while, but Paul said it was incredibly harsh. he abandoned it for the stock fork and we didn't look at it again. Only this weekend did he tell me it had come from a stunter's bike, doh! The compression circuit was probably modified. I had just done a refresh and springs, couldn't understand why it was un-rideable.



I did a ZX6R front end on a very light (285 lb) project bike and I had the same issue. Did you go lower on the spring rate? I had to do that with my 290lb 250 Ninja with the stock front end with emulators. Even though I weigh around 190 lb I had to use springs that were close to the stock spring rate.
tgold is offline   Reply With Quote