Here's the maintenance schedule for this RX4....
I didn't think it was bad at all really... I probably miss quoted it I have had alot of things on my mind lately ...mainly trying to think of a way to lower that tall beast... for me tipy-toe operation AIN'T making it it has a 31.9" seat height
and that is too tall for my 30" inseam ( with boots on)
so i lowered the pre load last night about 1" and I don't like it because on a bump the rear wheel will be able to flop down i can lift the ass of the bike now 2" before the wheel comes off the ground.... and that is a ****** solution
not to mention that the spring will chew up the threads of the pre load.
...
that this is HEAVY. 450lbs is a heavy bike ! my triumph is only 400lbs
.... I think I'll call her Miss piggy ! geez !
.... but heavy and tall is not good for me ! i gott'a do something about that
the links in the rear suspension are an over engineered nightmare of heavy aluminum parts that do not lend themselves well to lengthening !
.... i gott'a think on this a while
Bob......
__________________________________________________
Its too late when you've gone too far !
|