View Single Post
Old April 19th, 2011, 08:18 PM   #1
SdSy675
ninjette.org member
 
Name: Glenn
Location: San Diego
Join Date: Apr 2011

Motorcycle(s): 06 Daytona 675, 09 Ninja 250

Posts: 41
HELP?! Reinstalling Carbs?!

Is there an online copy of the Ninja Service Manual?!?!?

Here's an example of what NOT to do... DO ALL MODS AT ONCE!!! Besides cleaning the carbs, brake calipers, entire bike, replace rearsets with new rearsets, replace brake pads, replace brake lines, flush brake fluid, flush radiator, do an oil change, install undertail, remove airbox, remove CA emissions to include Kleen Air, Rejet the carbs, clean out the gunk in the Pilot jets, pulling out the mixture plugs and adjusting to 2 1/2, replace levers, shim the needles, etc. etc. etc...

I took out the carbs out almost two weeks ago and now that I have everything ready to reinstall, I completely forgot which hose goes where... HELP!!! What screwed me up the most is when I ripped out the Kleen air/CA emissions crap... I forgot which tubes to plug, what needs to be ventilated, which tube to plug on the tank and which hose connects to the petcock...

I'M SCREWED!!! Remember kids... don't bit off more than you can chew... OR ELSE YOU'LL CHOKE AND DROP DEAD LIKE ME!!! HELP!!!
SdSy675 is offline   Reply With Quote