View Single Post
Old June 30th, 2019, 02:13 PM   #2
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Here's items that's been tested and declared good.

stick-coils (inferred from using other coils)
factory coils from green bike
factory coils from red bike
Danno's IC igniter
factory IC igniter (inferred from using Danno's unit)
NGK Iridium plugs gapped to 0.037"

factory airbox & filter (inferred from pods install)
pod filters
petcock and filters - flows 380cc/min
gas cap, vented an tested with no cap
carbs refurbed by ducatiman

valve-clearances are at upper-end of range
cam-timing is correct, I assume cam-chain tension OK?
Tyga exhaust is clear
pyrometer showed both header pipes same temp.

Last futzed with by DannoXYZ; July 1st, 2019 at 03:24 PM.
DannoXYZ is offline   Reply With Quote