View Single Post
Old May 1st, 2020, 10:00 AM   #75
DannoXYZ
ninjette.org certified postwhore
 
Name: AKA JacRyann
Location: Mesa, AZ
Join Date: Dec 2011

Motorcycle(s): CB125T CBR250R-MC19 CBR250RR-MC22 NSR350R-MC21 VF500F CBR600RR SFV650 VFR750F R1M ST1300PA Valkyrie-F6C

Posts: A lot.
MOTY - 2018, MOTM - Nov '17
Yeah, not sure how you have it wound up and not spring back out when let go. Typically you wind it up by turning with screwdriver.

Vex's process winds it up just before you install onto block. Hold with screwdriver as you install: https://www.ninjette.org/forums/show...47&postcount=2

Tool looks like this. You can use tip of Xacto knife.



So what was your beginning valve-clearances and final after adjustment?
DannoXYZ is offline   Reply With Quote