ninjette.org - View Single Post

The Toe Cutter · August 8th, 2021, 01:52 PM

I have a 2013 Ninja 300 non abs. I just did the valve service, when everything was buttoned up and started. Bike sounds normal, no funny sounds, but service engine light is on. I connected my blue tooth odb2 scanner while using the Garage Pro app on my phone. It had Kawasaki listed as one of the vech it can scan. Scanned while motor was running, it came up with no codes found. Light is still on.

I am wondering if there is another app that I can use and see if there is an issue. This is being converted to a track bike, I do not have the turn signals on, would that cause the light to come on? Thanks for the info.

August 8th, 2021, 01:52 PM	#1
The Toe Cutter ninjette.org newbie Name: John Location: Peoples Republic of PA Join Date: Oct 2020 Motorcycle(s): 99 zrx1100, 03 Zx6r, 14 Ex300 Posts: 5	ODB2 Scanner App I have a 2013 Ninja 300 non abs. I just did the valve service, when everything was buttoned up and started. Bike sounds normal, no funny sounds, but service engine light is on. I connected my blue tooth odb2 scanner while using the Garage Pro app on my phone. It had Kawasaki listed as one of the vech it can scan. Scanned while motor was running, it came up with no codes found. Light is still on. I am wondering if there is another app that I can use and see if there is an issue. This is being converted to a track bike, I do not have the turn signals on, would that cause the light to come on? Thanks for the info.