Do you happen to have a pair of long reach needle nose plyers ?
I got mine from harbor freight tools about 2 years ago and I use them constantly on the Ninja... i got the straight nose and bent nose pair.... i use the straight ones the most....
get all the hoses and crap back so you can actually see in there and try that....
.....
another idea is if the spark plug socket has a hex head on it find a socket that fits that instead of trying to get the extension in the hole.... 11/16" or 3/4" socket probably won't fit in the hole to go on the socket though but it is worth a try.... use some tape over the edge of the socket to get it to stick on there....
by jamming it on.....
....
good luck...
Bob......
__________________________________________________
Its too late when you've gone too far !
|