ninjette.org - View Single Post

remme · July 28th, 2010, 06:21 PM

I'm trying to install shogun frame sliders. I'm at the step where I have to remove the sprocket cover to cut. The 3 bolts were removed along w/ the shift lever link bolt and shift shaft. The stupid cover just won't come over.. tried pulling it and using some rope to pull it. Also tried hitting it with a 'wooden mallet' but nada.

All the instructions said you should pull it off but damn it's hard... any solutions or suggestions?

July 28th, 2010, 06:21 PM	#1
remme ninjette.org newbie Name: J Location: NJ Join Date: Jun 2010 Motorcycle(s): '08 Ninja 250 Posts: 5	hard time removing the sprocket cover I'm trying to install shogun frame sliders. I'm at the step where I have to remove the sprocket cover to cut. The 3 bolts were removed along w/ the shift lever link bolt and shift shaft. The stupid cover just won't come over.. tried pulling it and using some rope to pull it. Also tried hitting it with a 'wooden mallet' but nada. All the instructions said you should pull it off but damn it's hard... any solutions or suggestions?