Quote:
Originally Posted by rocka81
got through shimming the needles on my bike today, i had some 4mm washers already that i was going to use (Until i read through here) but headed down to jaycar and scored a pack of 3mm washers for a whopping $3. I used 2 washers under each needle and perfect results for my bikes setup. My bike only has the snorkel removed with a mussari slip on.
Started to strip the front left screw on the left carb, then stopped and put the needle nose vice grips on as well as the screwdriver to crack it, and presto.
Absolutely loving all the info on this site  |
I was able to find #4 washers at a local hobby store for $ 0.89.
+1 on the information this site has to offer
