|
Ok I'm a little confused. First I want to make sure the unit is working correctly.
Matt... Can you confirm the led status with switch on and switch off. Switch "off" which I assume is map 1, red is illuminated. Switch "on" red and green are illuminated. I have noticed when cranking the bike with the switch in the "on" position, the blue led blinks but does not illuminate.
Once I am confident the unit is working properly, I will comment on the units performance. I will say right now that I have no idle issues. Idle went down a little if anything. Holding around 1350 rpm's.
Posted via Mobile Device
|