ninjette.org - View Single Post

austexjg · July 26th, 2010, 02:49 PM

Jason - " I did turn my adjustment screws in an additional 1/4 turn." - on the carb or the idle adjustment screw on the side of the bike?

I'm thinking about adding a jet kit instead of the shimming - just don't think I'm going to DIY it - need to shop around on installation/tuning prices.

July 26th, 2010, 02:49 PM	#71
austexjg ninjette.org sage Name: J.G. Location: Austin Join Date: Oct 2009 Motorcycle(s): '09 zx6r Green/Black, (ex-)Diablo Black '09 Ninja 250r Posts: 959	Jason - " I did turn my adjustment screws in an additional 1/4 turn." - on the carb or the idle adjustment screw on the side of the bike? I'm thinking about adding a jet kit instead of the shimming - just don't think I'm going to DIY it - need to shop around on installation/tuning prices. Last futzed with by austexjg; July 28th, 2010 at 08:49 AM.