Quote:
Originally Posted by austexjg
Jason - " I did turn my adjustment screws in an additional 1/4 turn." - on the carb or the idle adjustment screw on the side of the bike?
I'm thinking about adding a jet kit instead of the shimming - just don't think I'm going to DIY it - need to shop around on installation/tuning prices.
|
Yeah I'm talking about the screws on the bottom side of the carbs. If you turned the idle knob another 1/4 in then your would be raising the idle. If in fact this is true, try backing off on the idle knob to adjust your idle. See you owner's manual if you need any help.
__________________________________________________
09 250R SE: Paying it forward one post at a time!
Don't forget to add yourself to our
Member Map