ninjette.org - View Single Post

KurtF · September 27th, 2021, 11:36 AM

OK, carbs apart again -- my new-to-me '06 -- "just needs the carbs cleaned" as they say.

First a specific question before I get into all the history and details. When I got the bike, one of the hoses was missing that goes between the coasting enrichener and the right carb.

Here's a pic from https://faq.ninja250.org/wiki/Ninja250_Howto

My question -- it looks like the hose from the lower spigot on the right carb connects to the top forward spigot of the coasting enrichener, and it looks like the upper spigot on the right carb connects to the top rear spigot on the coasting enrichener.

Is that correct?

EDIT -- With a closer look, now I see that these "spigots" are two different diameters, so I figger I'll just match 'em up.

Thanks for any help.

-------------
Yes, I've worked on carbs before

just not this type. I've been referring to the Ninja 250 how-to page linked above, and to this "secret passages" link http://n4mwd.blogspot.com/2013/10/se...-passages.html and reading many posts and threads ... .

September 27th, 2021, 11:36 AM	#1
KurtF Rust never sleeps. Name: Kurt Location: Arlington MA Join Date: Jul 2021 Motorcycle(s): 2006 Ninja 250, 2001 ZRX1200R, 2020 Guzzi V85TT, 1996 DR350 Posts: 9	Carb questions 2006 EX250F OK, carbs apart again -- my new-to-me '06 -- "just needs the carbs cleaned" as they say. First a specific question before I get into all the history and details. When I got the bike, one of the hoses was missing that goes between the coasting enrichener and the right carb. Here's a pic from https://faq.ninja250.org/wiki/Ninja250_Howto My question -- it looks like the hose from the lower spigot on the right carb connects to the top forward spigot of the coasting enrichener, and it looks like the upper spigot on the right carb connects to the top rear spigot on the coasting enrichener. Is that correct? EDIT -- With a closer look, now I see that these "spigots" are two different diameters, so I figger I'll just match 'em up. Thanks for any help. ------------- Yes, I've worked on carbs before just not this type. I've been referring to the Ninja 250 how-to page linked above, and to this "secret passages" link http://n4mwd.blogspot.com/2013/10/se...-passages.html and reading many posts and threads ... . __________________________________________________ Kurt 2006 Ninja 250 (blue) Last futzed with by KurtF; September 27th, 2021 at 02:28 PM.