View Single Post
Old August 26th, 2013, 08:50 PM   #17
jackliu239
ninjette.org member
 
Name: Jack
Location: California
Join Date: Aug 2013

Motorcycle(s): 2006 Ninja 250R

Posts: 81
Also during the warm up process, the engine won't start with full choke on, unless I give it a bit of gas to start.

What I have to do is that, press the start button, I would hear this put-put-put then it quickly dies out. UNLESS at the same time of starting the put-put-put I give it throttle then immediately the engine would start come online and jumps to about 4-5k RPM (I can let go of throttle and it still runs) it stays there until the engine fully warms up, (this is with choke on btw), but if I ever put off the choke in the process of warming up, the engine would dies right away.

I'm not worried about turning off choke and engine dies during warm up, I heard this is normal.

But is the other part normal? The one that immediate after the engine starts I have to give it gas to make it from dying out (once I give it gas to start, the engine can keep going with no problem).

With everything else being said, the bike runs excellent (I think).
jackliu239 is offline   Reply With Quote