This is what I have done so far...
Now the baffle could be inserted in the outlet side without causing any damage. I working on how to fix it there.
If this does not work the next options would be:
1. Remove the double wall (the one I have cutted)
2. Cover the tube with a copper one with smaller holes
3. Replace the inner tube with a larger one with smaller holes
cuong-nutz:
1. should the fiberglass be between the baffle and the perforated tube in the exhaust can??
2. How long should the tube be??
3. Any suggestion about the holes size?? I'm thinking on 1/4"
Thanks again to all
|