ninjette.org - View Single Post - Pulling the carbs and doing a valve check.

Bob KellyIII · June 5th, 2023, 11:29 PM

ok I get that, but how did it run when it was new if it can't run that way Now with the same stock jets ?
....
I'm no rocket scientest but there are a few rules you can count on in mechanics... put it back to stock and it will run right.... that doesn't work here ! WHY ? I have no answers
for that..... it's like an exception to the rule !
....
Sure we can always get it to run again with enough tinkering and figuring out where the Fuel air ratio is going wrong.... but it's the idea that STOCK SETTINGS NO LONGER WORK that get me ! that is unprecedented ! what caused that to happen ?
something changed to cause that ! when you clean the carbs you make it better not screw it up.....Yet the end results is a screw up that shouldn't be ! you can't dirty up the carbs to make it right again.... that would be silly, we need to find out what changed
so others don't run into the same problem and so I can return the bike back to stock settings.
..... this has got to be the strangest Mechanical screwup I have ever seen !totally weird !
....(it's not supposed to work that way ! )
Bob......

June 5th, 2023, 11:29 PM	#96
Bob KellyIII Retired motorcycle Mc. Name: Robert Location: Weed, California. Join Date: Jul 2021 Motorcycle(s): 2012 Kawasaki Ninja 250R, 2021 CSC TT250, 1977 Triumph Bonneville 750cc,2001 Honda XR650L. Posts: A lot.	ok I get that, but how did it run when it was new if it can't run that way Now with the same stock jets ? .... I'm no rocket scientest but there are a few rules you can count on in mechanics... put it back to stock and it will run right.... that doesn't work here ! WHY ? I have no answers for that..... it's like an exception to the rule ! .... Sure we can always get it to run again with enough tinkering and figuring out where the Fuel air ratio is going wrong.... but it's the idea that STOCK SETTINGS NO LONGER WORK that get me ! that is unprecedented ! what caused that to happen ? something changed to cause that ! when you clean the carbs you make it better not screw it up.....Yet the end results is a screw up that shouldn't be ! you can't dirty up the carbs to make it right again.... that would be silly, we need to find out what changed so others don't run into the same problem and so I can return the bike back to stock settings. ..... this has got to be the strangest Mechanical screwup I have ever seen !totally weird ! ....(it's not supposed to work that way ! ) Bob...... __________________________________________________ Its too late when you've gone too far !